Highway - Construction Section Qualified Products Information

Text Size: A+| A-| A | Text Only Site | Accessibility

Highway - Construction Section

Qualified Products Information


AASHTO and ASTM Publications	Pavement Marking Types	Striping Tape
How To Get A QPL	PCC Patching	Temporary Tape Types
Impact Attenuator - Permanent	PCMS PVMS - Changeable	Traffic Lines - Durable
Legend Markings	Portable Traffic Signals	Automated Flagger Assistance
NCHRP Report 350	Reflective Elements	Traffic Paint-High Performance
Pavement Marker Adhesives	Slow/Stop Paddles	Flex Bit Pave Mark Adhesive


AASHTO and ASTM Publications

If you need copies of any AASHTO or ASTM publications you will need to contact those organizations directly. Copies may also be available at the public library or at local bookstores. We cannot supply copies of these documents. You can get AASHTO publications by contacting: American Association of State Highway and Transportation Officials 444 North Capital Street NW, Suite 249 Washington, DC 20001 Phone: (800) 231-3475 Fax: (800) 525-5562 Website: https://bookstore.transportation.org You can get ASTM publications by contacting: American Society for Testing and Materials 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 Phone: (610) 832-9585 Fax: (610) 832-9555 Website: http://www.astm.org


How To Get A QPL

E-mail Copies E-mail Copies If you would like to be added to the e-mail group to get an electronic copy of the QPL, please click on the link above. Electronic Versions PDF Document This is a complete document exactly like the paper copy. It includes the supporting data, indexes, the list of qualified products, and the list of projects that have been rejected. There are rudimentary search routines available. Internet Version You can access the document on the Internet. There are search and sort features. After you do your searches, you can print the results. It allows access to the Qualified List and the Rejected List. Hard Copies Hard copies of the QPL are not available for contractors or manufacturers anymore. Please use one of the electronic versions.


Impact Attenuator - Permanent

Permanent Impact Attenuator Product Review Guidelines Impact Attenuator Attribute Checklist Impact Attenuator Attributes

Legend Markings

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
ODOT STANDARD SPECS FOR LEGEND MARKINGS	This is Standard Specs for Durable Legend Markings. You can find an official copy of our Specs at this web site.
ODOT SPECIAL PROVISIONS FOR LEGEND MARKINGS	This is the Standard Modification for the Standard Specification above. We call them special provisions. This, in conjunction with the Standard Specifications above, makes up our Contract Specifications for new projects. Existing projects may differ slightly.
WARRANTY CERTIFICATION	Here is our warranty certification statement. This is required for each of the products you wish to submit.
RECOMMENDED WARRANTY STATEMENT	This is our recommended warranty statement. A document similar to this will be required on each project at the time of construction.
LINKS TO STANDARD DRAWINGS	Standard Drawings for Durable Legend Markings can be found at this site.


NCHRP Report 350

Workzone Devices (Link to FHWA Web site) Traffic Barriers, Barrier Terminals, Crash Cushions, and Bridge Railings (Link to FHWA Web site) FHWA Workzone Letter # WZ-161 (W/updates on Category IV devices) Self Certification - Category 1 (ODOT form to be included with each category 1 product submitted) ODOT Traffic Control Notice


Pavement Marker Adhesives

Flexible Bituminous Pavement Marker Adhesive Standard Bituminous Pavement Marker Adhesive Epoxy Pavement Marker Adhesive


Pavement Marking Types

Type 1 Pavement Markers Type 1AR Pavement Markers Type 1 Recessed Pavement Markers Type 2 Pavement Markers


PCC Patching

PCC Patching PCC Patching Questionaire


PCMS PVMS - Changeable

Trailer Mounted Standard Guideline for Product Review Trailer Mounted PVMS/PCMS Specifications (Attachment A) Checklist and Certification of Compliance (Attachment B) Group Evaluation (Attachment C) Truck Mounted Standard Guideline for Product Review Truck Mounted PVMS/PCMS Specifications (Attachment A) Checklist and Certification of Compliance (Attachment B) Group Evaluation (Attachment C) Permanently Mounted PCMS/PVMS Changeable Message Sign


Portable Traffic Signals

Portable Traffic Signals - Short Term Portable Traffic Signals - Temporary Worksheet Fill out and submit with each Submittal (Portable Traffic Signal Temporary Only)


Reflective Elements

Standard Glass Elements Large, Virgin Glass Elements


Slow/Stop Paddles

Flashing Lights Flashing Lights - Experimental

Striping Tape

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
ODOT STANDARD SPECS FOR PERMANENT STRIPING TAPE	This is a Standard Specs for Permanent Striping Tape. You can find an official copy of our Specs at this web site.
ODOT SPECIAL PROVISIONS FOR PERMANENT STRIPING TAPE	This is the Standard Modification for the Standard Specification above. We call them special provisions. This, in conjunction with the Standard Specification above, makes up our Contract Specifications for new projects. Existing projects may differ slightly.
WARRANTY CERTIFICATION	Here is our warranty certification statement. This is required for each of the products you wish to submit.
RECOMMENDED WARRANTY STATEMENT	This is our recommended warranty statement. A document similar to this will be required on each project at the time of construction.
LINKS TO STANDARD DRAWINGS	Standard Drawings for Permanent Striping Tape can be found at this site.


Temporary Tape Types

Removable Temporary Tape Non-Removable Temporary Tape Removable, Non-Reflective Tape

Traffic Lines - Durable

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
ODOT STANDARD SPECS FOR DURABLE TRAFFIC LINES	This is a Standard Spec for Durable Traffic Lines. You can find an official copy on our Specs at this web site.
ODOT SPECIAL PROVISIONS FOR DURABLE TRAFFIC LINES	This is the Standard Modification for the Standard Specification above. We call them special provisions. This, in conjunction with the Standard Specification above, makes up our Contract Specifications for new projects. Existing projects may differ slightly.
WARRANTY CERTIFICATION	Here is our warranty certification statement. This is required for each of the products you wish to submit.
RECOMMENDED WARRANTY STATEMENT	This is our recommended warranty statement. A document similar to this will be required on each project at the time of construction.
LINKS TO STANDARD DRAWINGS	Standard Drawings for Durable Traffic Lines can be found at this site.


Automated Flagger Assistance

Product Review Guideline This document lists the requirements we have for this category of product. As part of your submittal you will also need to include one of the next two worksheets, depending on the type of AFAD you are submitting. Red and Yellow Lens AFAD Worksheet Stop-Slow Sign AFAD

Traffic Paint-High Performance

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
ODOT STANDARD SPECS FOR HIGH PERFORMANCE MARKINGS	This is a Standard Spec for High Performance Markings. You can find an official copy on our Specs at this web site.
WARRANTY CERTIFICATION	Here is our warranty certification statement. This is required for each of the products you wish to submit.
RECOMMENDED WARRANTY STATEMENT	This is our recommended warranty statement. A document similar to this will be required on each project at the time of construction.


Flex Bit Pave Mark Adhesive

Flexible Bituminous Pavement Marker Adhesive Test Method 429-95 Test Method 432-05

Page updated: February 29, 2008

Adobe Reader is required to view PDF files. Click the "Get Adobe Reader" image to get a free download of the reader from Adobe.